How to make Deca 200mg/ml with pictures

[candle25]

Supplies:
10g "Powder"
2.5ml of Benzyl Benzoate
2.5ml of Benzyl Alcohol
37.5ml of your favorite Oil
20CC Syringe
12CC Syringe
1 23ga 1/2” needle
1 25ga 5/8” needle
.22 Sterile Whatman Filter
50ml Sterile Vial
50ml Vial
Electric Scale
Rubbing Alcohol/Paper Towels
Scoopula
Oven
pan

[candle25]

1. Place 40ml oil in a muffin tray.
2. Place tray in oven at 225¢ªF & pan with water on oven eye at med/low.
3. Wipe down work area with Isopropyl Alcohol.

[candle25]

4. Place un-sterile vile on scales with funnel inserted and tare.
5. Transfer 10g powder to vile with the scoopula.

[candle25]

6. Add the 2.5ml of bb and 2.5ml of ba with the 12cc syringe.
This is what it looks like after the bb & ba has been added.

[candle25]

7. Now add 32.5ml of the 37.5ml of oil into the vial to make total volume of oil/ba/bb/hormone to be 45ml. Leave the 5ml of oil in the oven for later use.
8. Place vile with mixture on oven eye to dissolve.
This is what it will look like.

[candle25]

9. Take out sterile 50ml vial and wipe stopper with rubbing alcohol. Put the 23ga needle and the 25ga needle through stopper, and attach whatman filter to the 25ga.
In this photo I was using a millpore filter that GiJoe asked me to test for him.

[candle25]

10. Open up 20ml syringe and attach 18ga needle and draw up 20ml of unfiltered gear. Transfer it to the sterile vile through the filter. You will need to repeat this step until all the unfiltered soln has been transferred.
11. Once all the unfiltered soln has been transferred run the 5ml of oil you saved through the filterer to purge it. Follow this with air.

You will have 50ml at 200mg/ml. Enjoy.

[Topher]

Dare i steal this from the schools chem stock room and make my own (.....scheming.....)

[candle25]

Damn, your school stocks powdered hormones? I'd do it...lol.

[GATOR]

hey bro nice post. I just finished deca at 250mg/ml....my solvent ratio was 3%/12% BA/BB. It worked nice but my final product looks a little merky or cloudy???? Do you know why this could be?
I did EQ and tren....turned out real nice(clear golden) but my cyp. and deca are a little opaque looking? any thoughts.

[candle25]

You def have enough solvent so I'd suspect it is due to the concentration. I know you filter your gear well so that shouldn't be an issue. As long as it doesn't crash I don't suppose it will give you any issues.

[GATOR]

tHANX DUDE.....Right now they are both un-filtered but this week I will be using the 0.2 micron filters to finalize the gear. I'll try to post some pics for you boyz to see.

[Skyefire]

bump a good thread

[EViLUTiON]

Good post!

[candle25]

Thanks. It was great threads like this that helped me when I started homebrewing.