Tweet
I've just took my first shot of T-400 on monday and my ass is still sore. i've been reading up a little on sterile oils and am thinking about cutting it with cotten seed oil. Is this the best way to go and will i be able to just draw it straight out of the vile to mix with T-400 in the syringe, or will i need a separate vile to mix myself?? here is the website i ordered the cotten seed oil from: www.lionnutrition.com. thanks guys.
-
-
well if you want to know what concentration you have id say mix it from two containers into one. If you still have discomfort try heating it a little , and make sure you get down in there www.spotinjections.com should be helpful. T-400 is not that bad from my experience so just double check yourself to avoid problems. :) -
t400 is crazy. i'd dilute it 50/50 if it were me. just draw up 1cc of the t400 and 1cc of sterile oil. let the two oils diffuse and then inject. even at a 1:1 ratio you will still more than likely have a little pain with it.Comment
-
yep my T400 that I had was diluted with sterile oil and eq. I was only injecting 1/4 cc of the T400 and it still fucking hurt with the oil and eq with it.Originally posted by goliath
t400 is crazy. i'd dilute it 50/50 if it were me. just draw up 1cc of the t400 and 1cc of sterile oil. let the two oils diffuse and then inject. even at a 1:1 ratio you will still more than likely have a little pain with it.Comment
-
Re: sterile oils?
If the oil is sterile then yes you can. if not then you need to sterilize it yourself with a whatman filter. adding a little BA will not hurt ether. If you need directions just ask.Originally posted by kenk
I've just took my first shot of T-400 on monday and my ass is still sore. i've been reading up a little on sterile oils and am thinking about cutting it with cotten seed oil. Is this the best way to go and will i be able to just draw it straight out of the vile to mix with T-400 in the syringe, or will i need a separate vile to mix myself?? here is the website i ordered the cotten seed oil from: www.lionnutrition.com. thanks guys.Comment
-
Kenk:
FYI
I just ordered some sterile oil from the website you mentioned. The oil comes in a bottle with a screw on lid - not in a sealed sterile vial.
I don't think you can just inject, but, then again, I've never cut before.
Any flexperts have an opinion?
thxComment
-
a whatman filter is cheaper than surgery is my opinion, go the safe wayComment
-
GOT SOME OIL FROM GPZ IT IS FILTERED OIL AND LABELED NOT FROM HUMAN USE FOR RESEARCH ONLY, IS THIS OIL SAFE?Comment
-
Thx Pudgy:
OK - so, I need to buy a whatman filter and a sterile, sealed vile?Comment
-
IMHO You should always filter any oil you get no matter what. 4-6 dollars for a filter versus injecting bacteria and who knows what can lead to.....Death or maybe just a huge puss goider that will need to be hacked out by a doctor which will leave a lovely scar on your body and on your wallet.Comment
-
alright...thanks guys but this shit sounds way to complicated! i think ill just say F it and finish my cycle...if anybody has any easier suggestions please let me know. thx.Comment
-
i think everyone has valid points, but might be "scaring" you a bit too much. the cotton-seed oil from lion is fine. cut to your desire, and shoot away. another thing you can try is just lesser volume shots of the T400 multiple times per week with some advil. i really think the T400 "pain" is way over-exagerated as it doesn't bother me all that much in the least.Comment
-
on a side note... i'd personally trust cottonseed oil over many of the UG lab AS anyday when it comes to possible infection. as for the label for "research purposes only" - they have to print that to cover their ass.Comment
-
I have to agree. Even if the oil was filtered before there is often no sterilizing agent in it. This means that once you open/pierce the seal it is no longer completely sterile. If you need to know something about a product you should always ask the seller.Originally posted by pudgy
a whatman filter is cheaper than surgery is my opinion, go the safe way
While you don't want a lot of solvent in a oil solution I would suggest always using some, this can actually help reduce the pain further so long as its not over done. (It increases the solvent to hormone ratio).
All propose gear-cutting oil
3ml of BA
5ml of BB
93ml of grapeseed or cottonseed oil
Filter with a .2 micron filter
The BA will help insure sterility and the BB will keep the oil from being absorbed to quickly.Comment
-
shot it straight bro.It just hurts a little.Hell try 3cc of t400 in one inject.Comment
Comment