Announcement

Collapse

Advertising Inquiries

Contact: [email protected]
See more
See less

painless 133mg prop

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    painless 133mg prop

    I read a post that said that he was able to get 100mg of prop stable at 2%ba and 7%bb. I decided to make a batch of 133mg prop and it turned out to be painless, I have tried prop made at 100mg/ml before that was painful so this was a big plus.

    10 grams of prop
    3ml of ba
    10.5ml of bb
    enough oil in the beaker for the total volume to reach 70ml. then an extra 5ml at the end to flush the .20 micron filter.

    I am going to try some masteron with the same recipe......I love masteron.
    Tags: None
  • #2
    That sounds like good powder more then anything bro/

    Comment

    • #3
      How do you guys make it painless? Crap, I did a prop conversion with a ratio of 3%/15% and it came in at about 145 mg/ml.....and every time I "fire" I have to cut it in half with sterile oil to reduce the pain........and still hurts.

      Comment

      • #4
        Originally posted by Skyefire
        That sounds like good powder more then anything bro/
        best powder in china!
        god I love those china-men!

        Comment

        • #5
          The injection should be 95% painless on Test Prop even at 5% BA 15% BB. If you have no sorness after the injection I would seriously question the quality of your powder. Test Prop is supposed to hurt a liitle. Simple as that.

          Comment

          • #6
            Originally posted by Miracle Man
            The injection should be 95% painless on Test Prop even at 5% BA 15% BB. If you have no sorness after the injection I would seriously question the quality of your powder. Test Prop is supposed to hurt a liitle. Simple as that.
            Im not talking painless like tren....Im talking painless as in it doesn't bother you a bit.

            Comment

            • #7
              Originally posted by dbol
              Im not talking painless like tren....Im talking painless as in it doesn't bother you a bit.
              Test Prop 100% painless altogether? I don't buy it. Even at 150mg/mL you should have some soreness post injection. It could be as much as 24 hrs later. If you do not have any type of soreness, then I would question either the preparation meaning the mg to mL ratio, or the quality of the powder. That is my take on the whole issue on Test Prop. You should have some soreness, thats how alto of bros know that they have the real deal. If you drop the dose to 25mg/mL, than maybe you may have a totaly sore free injectable. Thats my take bro, I have been in this game a very long time. I'll be 40 early next year.

              Comment

              • #8
                Originally posted by Miracle Man
                Test Prop 100% painless altogether? I don't buy it. Even at 150mg/mL you should have some soreness post injection. It could be as much as 24 hrs later. If you do not have any type of soreness, then I would question either the preparation meaning the mg to mL ratio, or the quality of the powder. That is my take on the whole issue on Test Prop. You should have some soreness, thats how alto of bros know that they have the real deal. If you drop the dose to 25mg/mL, than maybe you may have a totaly sore free injectable. Thats my take bro, I have been in this game a very long time. I'll be 40 early next year.
                yes test prop can be made painless. good quality powders help so does having a properly desolved mixture (prop is one off the few things that is better made hot). Also is a factor is the type of oil you are using as well as the amounts of the solvents. Prop need to made at a low consintration due to its partition coefficient. A good rule of thumb is 100mg/ml. for most people this should be painless if made correctly. However everyones tolarance is differnt and what is painful to one may not be to others. I know of one person that coulcn't stand prop over 75mg/ml. I like to run 125mg prop and 75mg test base. It depends a great deal on the person as well as how its made.

                But again, the quality of the powder make a huge differnce.

                Comment

                • #9
                  Originally posted by Skyefire
                  yes test prop can be made painless. good quality powders help so does having a properly desolved mixture (prop is one off the few things that is better made hot). Also is a factor is the type of oil you are using as well as the amounts of the solvents. Prop need to made at a low consintration due to its partition coefficient. A good rule of thumb is 100mg/ml. for most people this should be painless if made correctly. However everyones tolarance is differnt and what is painful to one may not be to others. I know of one person that coulcn't stand prop over 75mg/ml. I like to run 125mg prop and 75mg test base. It depends a great deal on the person as well as how its made.

                  But again, the quality of the powder make a huge differnce.
                  Very true, I see a difference with various oil carriers and your right, not everyone is made from the same cloth. Thanks for the heads up. :-)

                  Comment

                  Previous template Next
                  Working...
                  X