testbase in oil????

[Gods Son]

ok i made it but its crystalizing and cloudy.i used a kit from researchkits.com.Should i heat it?

[Growing Doc.]

what does that kit contain? (ok, i am too lazy to open the page)

[candle25]

How many carts did you use and what kit did you buy? It sounds like the soln is supersaturated, which would mean you put too much TNE in it. That would explain the crystallization. I'm not to familiar with the solubility of TNE, but I'm thinking it isn't that great.

[Growing Doc.]

No actually it is not. I am currently experimenting with test and boldenone. Hoping they will not bond together to form crystals i mixed them in BB only. I baked the paste i got from the mix and it became a fine liquid! But not as thin as it was before i did the mix. It was farely stable for 24h after the mix. Let me see tha label: 2ml BB 900mg test 700mg bold. It is there for 4-5 days And still a small percentsge has percipitated? Not bad, huh? I hope that after adding the oil and some BA (i think i will arrive at 3-4%) it will remain stable for until it gets injected. Then the BA flees and only the oil and the BB remain. But who cares? If it falls it will be after 24 for sure so no pain for me mister!

[candle25]

Good research bro. Keep up the good work.

[asacco]

I also used :

Sesame seed oil 16ML
5% BA
15% BB
2.0 grams Test No Ester
20 ML bottle

That one crashed as well.

I also made a Water Suspension with it and it works but the crystals are too large and jams even a 21 Gauge most of the time. Any advice on Micronization ? I have Micronized Winny powder and it works fantastic but this test powder isn't doing so well.

I can buy Cyclopentylpropionic acid but I need some instructions on how to add the ester. Any advice ?

[Skyefire]

Originally posted by Growing Doc.
No actually it is not. I am currently experimenting with test and boldenone. Hoping they will not bond together to form crystals i mixed them in BB only. I baked the paste i got from the mix and it became a fine liquid! But not as thin as it was before i did the mix. It was farely stable for 24h after the mix. Let me see tha label: 2ml BB 900mg test 700mg bold. It is there for 4-5 days And still a small percentsge has percipitated? Not bad, huh? I hope that after adding the oil and some BA (i think i will arrive at 3-4%) it will remain stable for until it gets injected. Then the BA flees and only the oil and the BB remain. But who cares? If it falls it will be after 24 for sure so no pain for me mister!

The test base yes, the bold base no. If you want test base in oil you can get up to around 75mg/ml. bold base is under 15mg/ml.

bold base can be made in a polyhidric solution though.

1 gram bold base
.5ml BA
1ml PG (optional, works better though)
1.5ml BB
About 6.5ml of PEG 200 to 400

You have to bake/heat this one to get it into a stable solution.

[Skyefire]

Originally posted by asacco
I also used :

Sesame seed oil 16ML
5% BA
15% BB
2.0 grams Test No Ester
20 ML bottle

That one crashed as well.

I also made a Water Suspension with it and it works but the crystals are too large and jams even a 21 Gauge most of the time. Any advice on Micronization ? I have Micronized Winny powder and it works fantastic but this test powder isn't doing so well.

I can buy Cyclopentylpropionic acid but I need some instructions on how to add the ester. Any advice ?

not trying to flame here guy but you don't sound like your ready to try something like that.

The reason this crashed is that your mg/ml is too high. 75mg/ml is about as high as you can go with TNE. Try that same formula with 1.5grams instead of 2, or less might be better. You can mix up a oil soluiotn of 5%BA and 15%BB to cut you crashed gear then try heating it up.

[Miracle Man]

2% BA
15% BB
PEG 400 or 200

Your done.

This will hold up to 100mg/mL of Test Base.

Good Luck

[doodlebob]

1 gram bold base
.5ml BA
1ml PG (optional, works better though)
1.5ml BB
About 6.5ml of PEG 200 to 400

You have to bake/heat this one to get it into a stable solution


Skye,
I tried this recipe to make 100mg per ml test base and it still crystalizes after a day or so. I read somewhere, someone suggested to use 20% PEG in a glycerin base? Anyone know if this is possible or can you even inject glycerin safely?

[Skyefire]

Originally posted by doodlebob
1 gram bold base
.5ml BA
1ml PG (optional, works better though)
1.5ml BB
About 6.5ml of PEG 200 to 400

You have to bake/heat this one to get it into a stable solution


Skye,
I tried this recipe to make 100mg per ml test base and it still crystalizes after a day or so. I read somewhere, someone suggested to use 20% PEG in a glycerin base? Anyone know if this is possible or can you even inject glycerin safely?

glycerin make an excellent base except it is VERY thick. Also You have to cut it with something as it is a powerful diretic and if you inject it strieght you will have problems.

[Miracle Man]

Originally posted by Skyefire
The test base yes, the bold base no. If you want test base in oil you can get up to around 75mg/ml. bold base is under 15mg/ml.

bold base can be made in a polyhidric solution though.

1 gram bold base
.5ml BA
1ml PG (optional, works better though)
1.5ml BB
About 6.5ml of PEG 200 to 400

You have to bake/heat this one to get it into a stable solution.

Not true. Bold base I have on hand at 50mg/mL

Test base I have on hand at 100mg/mL

Another recipe that I found to work for Test base, good alternative to PEG.

5% BA
10% BB
10% Super Solvent by "Animal"
Cottenseed oil.

Also, the winny in water recipe works well with Test Base. Also the recipe above is for dbal.

[GIJoe]

Animal also has a new magic solution out for Test base called "new A"; haven't tried it yet