Converting the new Revalor 200 into Tren Ace

[rado]

EVERYONE!

If you can't follow these steps/directions from this thread, what makes you think that you'll understand my reply to your PM?

Please stop the pms.

Then don't make it or buy it already made.

[rado]

March 1st is this weekend but will start the following. Just making 150ccs of tren at 200mgs a cc. Need to get more mast, and I will. Then I'll start the test mast first and add tren later; well maybe. If not I'll save for next cycle.

I've crushed 2 fina/revalor karts. I don't like using the bowl to crush it as you can see the residue and have to scrape off. I have over 30 filters; IMO you can never filter enough.

Now comes the time to be patient:)

[strider]

Quick question, Is it normal for the rinse water to turn white and milky? I feel like some of the tren got through and started crystalize or it's the estro crystallizing. I freaked out, had to make sure my filter was not torn.

[DSR97]

ok i have a question about synovex, and revalor!! need answered asap!! how much NAOH to use per cart of synovex(2000mg of testosterone p, 200mg estradiol)? I need to know because i want to get it just right so when its done i dont overkill it or underkill it with naoh. a response would be great guys!!

[monstermass1]

IM FOLLOWING YOUR STEPS ON HOW TO MAKE THE REVALOR 200 BUT WHAT IF I WANT TO MAKE IT WITHOUT A KIT WHAT SUPPLYS WOULD I NEED TO BUY AS FAR AS SOLUTIONS

[cbsutterfield]

First, I want to say I love the forum and thanks for the add. Second, love all the help I've received. I'm totally new to this area in its entirety, and was wondering if anyone could point me in the direction of these extraction kits, where I could obtain them? Thanks in advance. Also, I was curious if anyone has heard of Rhino Labs... just curious

[rado]

First, I want to say I love the forum and thanks for the add. Second, love all the help I've received. I'm totally new to this area in its entirety, and was wondering if anyone could point me in the direction of these extraction kits, where I could obtain them? Thanks in advance. Also, I was curious if anyone has heard of Rhino Labs... just curious

Visit google for all out research needs!

[Jakeb]

I see your step to step process but is all confusing man. I wish it was more simple like finaplix but that shits gone. Can I still somehow use a fina kit and extract the estra or no haha

[JDS]

Regards to Revalor 200 I've researched the syno kits and found all products used in the kits. My question is if you don't use HEET in the breaking down process of the pellets; what do you use?

[JDS]

too break down revalor 200 pellets

[rado]

Again...if you can't fogure it out with this thread, please don't PM me for questions or where to get the stuff....

[equalme]

So after a few weeks trying to find a reliable raw source I gave up and tried to convert a pack of Revalor-200. I used HEET and NaOH to strip the estro followed by a ice cold distilled water drip to form the tren crystals.

This is where I started having problems...I tried using paper coffee filters to filter out the crystals but the filter would clog up so fast that it was pretty much impossible to rinse the crystals correctly. I ended up finding something else around the house to use. After I let it dry for two days at room temperature it easily flaked off the filter I used. I read that tren ace powder easily dissolves in grapeseed oil so I didn't bother chopping up the bigger flakes of dried tren ace. I think I made the mistake of adding the gso first, then ba/eo after. It barely dissolved. I went to add the beaker into a warm/hot water but ended up accidentally tipping it over and that was that...

So questions I have:
1. Why am I having so much trouble filtering with coffee filter?
2. Should I have added the EO/BA first to dissolve completely, then grapeseed oil after?

Any other tips?

Thanks!

[rado]

So after a few weeks trying to find a reliable raw source I gave up and tried to convert a pack of Revalor-200. I used HEET and NaOH to strip the estro followed by a ice cold distilled water drip to form the tren crystals.

This is where I started having problems...I tried using paper coffee filters to filter out the crystals but the filter would clog up so fast that it was pretty much impossible to rinse the crystals correctly. I ended up finding something else around the house to use. After I let it dry for two days at room temperature it easily flaked off the filter I used. I read that tren ace powder easily dissolves in grapeseed oil so I didn't bother chopping up the bigger flakes of dried tren ace. I think I made the mistake of adding the gso first, then ba/eo after. It barely dissolved. I went to add the beaker into a warm/hot water but ended up accidentally tipping it over and that was that...

So questions I have:
1. Why am I having so much trouble filtering with coffee filter? Go to post #33 and look at pic 4, I don't use a coffee filter.
2. Should I have added the EO/BA first to dissolve completely, then grapeseed oil after? Yes

Any other tips?...you're gonna mess up a few times, I did.

Thanks!

Hop that helps

[equalme]

Alright so second attempt around and still not quite right. Here is what I did step by step using two cartridges of revalor-200 (4gram).

1.) I used heet to dissolve the crushed pellets (3 hours), then filtered through coffee filter.
2.) I poured in dissolved naoh (30mg since I was told 75mg per five cartridges and I only used two) and let it sit for 1 hour exactly.
3.) Ice cold distilled water and dripped for roughly 30 minutes (~400ml).
4.) Filtered through coffee filter and rinsed with a gallon and half of distilled water.
5.) Air dried for two days and used a card to chop up the powder.
6.) I weighed the dried powder and came out to almost exactly 3.5 gram (I used two cartridges which is a total of 4 grams).
7.) I mixed 1ml BA, 1ml EO, and 30ml GSO to get roughly 100mg/ml.
8.) Problem...the powder is not fully dissolving into the oil. I tried heating it ~225F for 30 minutes and it still isn't dissolving.

It looked like this:


I then filtered that through another coffee filter and there was a lot of goop left over but the filtered oil looked good. I went ahead and filtered that through a .2 syringe filter and ended up with this:



I scraped the goop off the coffee filter into a beaker and added straight EO just to see if it will dissolve...even sitting overnight is hasn't fully dissolved:


Can't figure out what I'm doing wrong...:(

[short2stop]

^^

Did you figure it out?