Converting the new Revalor 200 into Tren Ace

[Bouncer]

vette, i will Ronin know you are asking about this. check back in a bit.

[STSZ06vette]

kit question

im asking for your expert/experienced advice on the revalor kits ive been using this site for some time now to research this topic just recently registered though as you can see.
Do you know what the kit uses to break down the E in the revalor 200 kits?... Im NOT gonna use the HEET method as I use that shit in my water/meth injection system. I just want to make sure I get everything in order and havent ordered a kit yet because of this. I finally found and ordered 3 carts of the revalor 200 and def want to get this 20mg E out of it. Ive made probably 10-15 Fina H kits and got very good at it. within 2-3 days I would have a pretty sterile and potent mix :) Please help and offer your advice and if you know what the 5ml E remover is in the kits and if its enough to cover the 3 carts of revalor? also they didnt have a 6g kit which is what i would normally use for the 3 carts of fina h so since the 8g kit comes with 80ml of oil i just subtract 20ml right?

[STSZ06vette]

revalor kits

I'd really like some input here and i know this topic has been beat to death but here is my concern
Ive did fina for about 2 years roughly 1.5 yrs ago and just ordered 8g kit and 3 carts of revalor 200
the Topgun(reference) website didnt have a 6g kit and it seems you use 20ml oil per cart so I just have to make sure to extract 20ml from the 80ml kit im getting correct?
Also it says its the reval 200s kit but noticed it only comes with 5ml of the ester solubilizer solution as well as the 12g kit only coming with 5ml. Is this 5ml going to extract 3 carts worth of estradiol out completely or do I need to buy more? You would think the kit would come with enough since its sold as a complete kit but at the bottom of the page it has them (estradiol) in 10m and higher varieties?

Next question is about the HEET and crystal method which scares the shit out of me even though HEET is 97-98% methenol I still rather use whats in the kit even though Im not 100% if its NaOH solution or some other chemical used to extract it?
I was VERY good at yielding a very high Tren per cc/ml and have crazy good results using FINA alone but now I can add test cyp into the mix!!!

ANY HELP WOULD BE GREAT AND THANKS GUYS

[rado]

To answer you question about why I would run these three together, I guess it'd be because I've ran it before and it worked great. It leaned me out fairly quickly and I didn't have the water retention usually associated with the Test E. Imo I retain too much water so If I can take something to eliminate that then Im all for it. The only thing I dont like about it is that when tren is taken, I get a nasty metallic flavor in my mouth and I cough almost instantly and it lasts for about ten minutes. But everytime I've ran these three I've had great results.

That's tren for ya:D


Well if it's worked for you, then good...Why fix something that's not broken.

[Gonefishin]

I personally would never run winny and tren together. Although through out all these years people have said how tren affects your liver values, I've debunked that with actual blood work that I've posted. But then again, tren affects everyone differently.

I assume test would be cyp or enanthate? or Prop?

I know the obvious of a cycle like this, but what would be YOUR purpose for it?

To answer you question about why I would run these three together, I guess it'd be because I've ran it before and it worked great. It leaned me out fairly quickly and I didn't have the water retention usually associated with the Test E. Imo I retain too much water so If I can take something to eliminate that then Im all for it. The only thing I dont like about it is that when tren is taken, I get a nasty metallic flavor in my mouth and I cough almost instantly and it lasts for about ten minutes. But everytime I've ran these three I've had great results.

[Gonefishin]

Quite simple for me bro;

HEET...Google Image Result for http://www.goldeagle.com/images/landing-heet.jpg


I've even read where some idiot used acetone and water to try and remove the estro:rofl:

benzyl benzoate, propylene glycol are a couple alternatives.

I just buy the kits with the extraction kits or the extraction liquids themselves. Fuck all that nonsense of HEET. My shit has always come out great and have never used HEET.

Nice link by the way... enough said.

[Gonefishin]

Can you not buy the estro remover?

I can, and I will, I just wanted to know why HEET couldn't be used. Still learning about DIY methods. I've always had things readily available so it hasn't ever been an issue... seeing as it's damn near impossible to get certain things it's time to adapt and overcome. Thanks for the education.

[rado]

ignore last.... So I use benzyl benzoate and benzl alcohol for fina to separate the fillers... is that the same thing? Or do I need something different for the estro?

Can you not buy the estro remover?

[Gonefishin]

Quite simple for me bro;

HEET...Google Image Result for http://www.goldeagle.com/images/landing-heet.jpg


I've even read where some idiot used acetone and water to try and remove the estro:rofl:

benzyl benzoate, propylene glycol are a couple alternatives.

I just buy the kits with the extraction kits or the extraction liquids themselves. Fuck all that nonsense of HEET. My shit has always come out great and have never used HEET.

ignore last.... So I use benzyl benzoate and benzl alcohol for fina to separate the fillers... is that the same thing? Or do I need something different for the estro?

[Gonefishin]

Heet...But I don't advise of it...that's just my opinion bro. Or order another bigger kit and make sure you get the estro remover; they usually come with it.

Why dont you advise heet? I've been reading up on what to use and the majority of people say to use heet... Just curious why you advise against it.? It's good to get different opinions since everyone reacts different ya know... thanks

[rado]

Why don't you recommend heet? Most of what I've read says that's the way to go? I like hearing other ppls experience/opinions... also just ordered some Test E/Tren ace/win... just in case I fuck this one up.

Quite simple for me bro;

HEET...Google Image Result for http://www.goldeagle.com/images/landing-heet.jpg


I've even read where some idiot used acetone and water to try and remove the estro:rofl:

benzyl benzoate, propylene glycol are a couple alternatives.

I just buy the kits with the extraction kits or the extraction liquids themselves. Fuck all that nonsense of HEET. My shit has always come out great and have never used HEET.

[Gonefishin]

Heet...But I don't advise of it...that's just my opinion bro. Or order another bigger kit and make sure you get the estro remover; they usually come with it.

Why don't you recommend heet? Most of what I've read says that's the way to go? I like hearing other ppls experience/opinions... also just ordered some Test E/Tren ace/win... just in case I fuck this one up.

[rado]

Ok so I need a little help here! I just realized I ordered a kit for the Revalor 200 but it didn't come with the Ester remover... (Rookie mistake) I haven't had to do this step since Ive only ever dealt with fina. the site where I got the kit is not working right now... what else can I use to extract the ester? thanks.

Heet...But I don't advise of it...that's just my opinion bro. Or order another bigger kit and make sure you get the estro remover; they usually come with it.

[Gonefishin]

I personally would never run winny and tren together. Although through out all these years people have said how tren affects your liver values, I've debunked that with actual blood work that I've posted. But then again, tren affects everyone differently.

I assume test would be cyp or enanthate? or Prop?

I know the obvious of a cycle like this, but what would be YOUR purpose for it?

Ok so I need a little help here! I just realized I ordered a kit for the Revalor 200 but it didn't come with the Ester remover... (Rookie mistake) I haven't had to do this step since Ive only ever dealt with fina. the site where I got the kit is not working right now... what else can I use to extract the ester? thanks.

[rado]

What are your thoughts on a test/tren/win cycle?

I personally would never run winny and tren together. Although through out all these years people have said how tren affects your liver values, I've debunked that with actual blood work that I've posted. But then again, tren affects everyone differently.

I assume test would be cyp or enanthate? or Prop?

I know the obvious of a cycle like this, but what would be YOUR purpose for it?