Converting the new Revalor 200 into Tren Ace

[Jkap19]

Can you post pics? Did this happen with both batches you made? It may be due to oxidation but you would most likely have a very deep yellow powder.

I use the ba/bb first so I'm absolutely certain the aas will be soluble in the solution and I won't have to worry about it crashing.

[short2stop]

Because my solution turned out a dark brown and I'm not sure why

[Jkap19]

Add it before. I dissolve everything in ba/bb before adding oil.

[short2stop]

Not very good... Low... But I'll try again and see if I do better. Do y'all add the BB and BA before or after you dissolve the tren in the oil

[Jkap19]

So not taking it out of the filter at the end and letting it dry in there was my huge mistake because I just did another try and took it out of the filter and put it on a cookie sheet and if went perfect. I set it on a radiator and it dryed quickly too.
I also salvaged what I could from the first try and it mixed with the oil normally so the process worked. Thanks y'all

What was your final yeild?

[short2stop]

So not taking it out of the filter at the end and letting it dry in there was my huge mistake because I just did another try and took it out of the filter and put it on a cookie sheet and if went perfect. I set it on a radiator and it dryed quickly too.
I also salvaged what I could from the first try and it mixed with the oil normally so the process worked. Thanks y'all

[rado]

Do you feel like your tren from revalor is more effective than ugl?

Hard to confirm that because I've gotten great results from both....the ONLY difference is that I know how mine was made....but I also trust my source 100%...

[Jkap19]

this process takes patience, which seems most of you lack. But I've been there myself in the beginning. All of this process takes time, not like the old conversion; correct:thumb:

Do you feel like your tren from revalor is more effective than ugl?

[rado]

750mgs* yes. I have a scale. And I am currently doing that right now. It's sitting in a pot of hot water to speed up the process. Well see how it turns. Everything was going well until the last step. I also didn't put it on a plate to dry. I left it in the hat and that was a huge mistake. I can't get all the tren out. Live and learn. This is a lot different than the easy fina conversion I'm used to

this process takes patience, which seems most of you lack. But I've been there myself in the beginning. All of this process takes time, not like the old conversion; correct:thumb:

[rado]

Did you drip the water? If so 2 gallons will take some time. Tip: next time make sure the water is very cold. Stick it in the freezer before you do the drip. This will give you larger crystals and therefore a greater yield.

Make sure to let me know how everything goes!

Hence why the dripping should be done in the refrigerator.

[Jkap19]

750mgs* yes. I have a scale. And I am currently doing that right now. It's sitting in a pot of hot water to speed up the process. Well see how it turns. Everything was going well until the last step. I also didn't put it on a plate to dry. I left it in the hat and that was a huge mistake. I can't get all the tren out. Live and learn. This is a lot different than the easy fina conversion I'm used to

Did you drip the water? If so 2 gallons will take some time. Tip: next time make sure the water is very cold. Stick it in the freezer before you do the drip. This will give you larger crystals and therefore a greater yield.

Make sure to let me know how everything goes!

[short2stop]

750mgs* yes. I have a scale. And I am currently doing that right now. It's sitting in a pot of hot water to speed up the process. Well see how it turns. Everything was going well until the last step. I also didn't put it on a plate to dry. I left it in the hat and that was a huge mistake. I can't get all the tren out. Live and learn. This is a lot different than the easy fina conversion I'm used to

[Jkap19]

First, you are suppose to use 750mg or.75g naoh per 5 carts not 75mg. How did you even measure that? I can't remember how long it took to drip 2 gallons of water on sumo but it was a while. I don't believe it made a diference. Have you made it into a solution yet?

[short2stop]

I don't have pictures but here's what I did (very similar to what everyone has said in this thread)

Crushed 5 carts
Dissolved in one bottle of heet for 2.5 hrs
Filtered gunk out at bottom
Added solution of 75mgs NaOH solution. Which turned to a solid and went to the bottom
Let the solution sit 1 hr then dripped Distilled water in for 40 min
Then filtered with a painters hat and washed with 2 gallons

One question I have is if it is normal to take 2.5 hrs to wash 2 gallons. It took me that long but it didn't seem right

[Jkap19]

Just finished conversion but the crystals aren't exactly crystals. More like a thick glue/gel. Theyve been drying over 24 hrs. Should I let them dry more or did I do something wrong?

Post up everything you did step by step.